Gallery

Specifications:

• Open Riser
• 60mm American Oak Treads
• Closed Stringers for Paint
• 12mm Clear Toughened Frameless Glass
• 38mm Stainless-Steel Patch Fittings
• 50mm Round Stainless-Steel Spigots
• 38mm Round Stainless-Steel Rail
• 25x21 Stainless-Steel Channel
• 60mm American Oak Void Nosing

Note: Stain/Paint By Others
Location: NSW (2030)
Job Type: Renovation

Specifications:

• Open Riser
• 40mm Victorian Ash Treads
• Square Aris Nosing w/ 20mm Overhang
• 30mm Victorian Ash Nibs
• 350x200 Vic Ash Mono Stringer
• 10mm Clear Toughened Framed Glass
• 50x25 Stainless-Steel Rail P/Coated Mannex Black
• 38mm Square Stainless-Steel Posts P/Coated Mannex Black

Note: Stain/Paint By Others
Location: NSW (2118)
Job Type: New Build

Bottom Half Staircase Specifications:

• Closed Pine Riser Mitered to Cut Stringer
• 80mm Spotted Gum Treads w/ Square Aris Nosing
• 20mm over riser (End Grain detail)
• Bullnose Details
• 1/4 Landing

Top Half Staircase Specifications:

• Open Riser
• 80mm Spotted Gum Treads w/ Square Aris Nosing
• 40mm Spotted Gum Cut Stringers
• Stringers set in 100mm from end of tread
• Spotted Gum Floor Capping

Balustrade Specifications:

• 12mm Toughened Clear Glass
• 25 x 20 Stainless Steel Channel
• 38mm Stainless-Steel Patch Fittings
• 50mm Round Stainless-Steel Handrail
• Standard Stainless-Steel Brackets

*Swipe to see Before & After photos*
Note: Paint & Flooring By Others

Specifications:

• Vic Ash Cut Face Stringer
• Pine (Paint Grade) Closed Wall Stringer
• Blackbutt Treads w/ Pencil Round Nosing
• 20mm over riser - End Grain Detail
• Blackbutt Risers - Sanded End Grain
• N1-Square Blackbutt Newel Posts
• SS1-Plain Bar Stainless Steel Balusters
• S2-Contemporary Blackbutt Handrail
• Blackbutt Floor Capping & Well Trim

Please Note: This design required approval from governing building authorities as it does not meet NCC requirements.

Postcode: 2042  State: NSW

Our Gladesville Staircase, a stunning artistic feature for your home!

Staircase Specifications:

• Full Victorian Ash Timber Staircase
• 90x40 Timber Screen & Balustrade
• Timber Screen Fitted to Side of Treads
• Open Rise
• Face Mono Stringer
• Wall Cut Stringer
• Square Aris Nosing on Treads
• 20mm Over Riser End Grain Detail
• 1/4 Landing
• Bulnose Treads
• S2 Contemporary Wallrail
• 443 SPP Zinc Alloy Wall Brackets                      (Note: Images were taken whilst painting was incomplete)
• Floor Capping

Postcode: 2111 State: NSW